The Neo Vista is a portable vein illumination device for neonates and babies. When activated it displays a map of the vasculature on the surface of the skin, allowing clinicians to verify patency and avoid valves or bifurcations.

It is a more effective venepuncture procedure, with less patient discomfort, resulting in higher patient satisfaction and ensuring shorter procedure time.


  • Easy to use, economical and hands free
  • Increases the success rate with first attempt of venipuncture
  • Splash proof, so that the user can clean it with disinfectant according to Hospital guidelines
  • Minimum maintenance required

Click here to download leaflet in PDF format (requires adobe acrobat reader)

Click here to download usage instructions in PDF format (requires adobe acrobat reader)

Catalogue and downloadable PDF's

Please click on the Attachments tab below to view and download the leaflet and other technical documentation in PDF format (requires adobe acrobat reader)

  • Ordering Info
  • Specifications
  • Attachments
  • Additional Images

Sizes available:

When ordering, please quote the following (minimum quantity 1 box):

Order # Dimensions


TRANS1 108mm x 32mm (max) x 38mm (max) 20

Neo-Vista - Technical Specifications:

Lighting Source   Ø5 CAP LED
Working Mode   On-Off
Lumen  7 LM
Runtime  12 hours
Peak Beam Intensity  26 cd
Beam Distance  5m
Impact Resistance  1m
Battery Type  2 x AAA Alkaline
Switch Model  Push Button
Output Power  0.12W
Batteries Removable  Yes
Dimensions (mm)  10.8 x 3.8 x 3.2cm
Net Weight  26.5g
Material  ABS Plastic
Finishing  Abrasive
Lens Dimension (mm)  24 x 15.8 x 6.3mm
Lens Material  PC
Switch Position  body
Logo Position  Body and Battery cover


Usage Instructions:

Important:  Please read all the instructions, warnings and information below carefully, ensuring that you fully understand them prior to using the Neo-Vista transilluminator.

1.    Insert the batteries into the compartment of the Neo-Vista.

2.    To activate, press the On/Off button.

3.    Hold the Neo-Vista or put on a flat surface and place the palm of the patient’s hand over the LED of the device.

4.    Dimming the room lights will aid in detection using the Neo-Vista.

5.    Insert the IV-Catheter then switch off the Neo-Vista.

N.B. The patient’s fingers can be draped over the Neo-Vista in order to stretch the skin, so assisting with the location of veins.


1.    Replace old batteries with new AA type batteries once exhausted, it is recommended that both batteries are replaced at the same time.

2.    To clean the Neo-Vista, please refer to the relevant hospital’s regulations and protocols that apply.

3.    Once the Neo-Vista in no longer operational i.e. LED display faulty and/or On/Off switch broken, ensure disposal is achieved according to the hospital’s guidelines.

General Specifications:

Battery type: AA Alkaline
Compliance: Standard: IEC 60601-1 General requirements for Medical Equipment
LED type:  Φ5 CAP LED
Output Light wavelength: 620 nm - 635 nm  

Contact Us


Unit 25

17 Cairns Street


QLD 4129



Tel: +61 7 3209 9957

Fax: +61 7 3209 9976


Latest News

  • News

    November 18th to 21st 2019 Medica, Dusseldorf - Germany. Conlett Pty Ltd (Conlett Technology) - Hall 6, Stand G49 Our…